Products
-
HD107S 3535 Micro pixel LED Chip
(1) HD107S Smart 3535 SMD integrates high-quality external control double-wire serial cascaded constant current IC, compatible with SK9822/APA102, BUT MUCH BETTER, same control way. some factory indicate it as APA102, or say it is upgrade of sk9822, or named LC8823/NS107S.
(2) Complete external control pixel, make the color mix uniformity and consistency.The default output constant current value OUTR/OUTG/OUTB is 17MA.
(3) Built-in power-on reset and power-down reset circuits, the light does not light up after power-on.
(4) Two-wire data transmission, unlimited cascading, the maximum serial input data frequency is 40MHz.
(5) No data input, zero power consumption when the light is off.
(6) The PWM refresh frequency is 27KHz.
-
HD8812 SK6812 WS2812B 5050 Pixel LED Chip Black and White
HD8812 5050 Pixel LED is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit. Its appearance is the same as a 5050 LED . Each LED is a pixel, it is same function with addressable pixel 5050 sk6812/ws2812b/lc8812/apa104/apa105/apa109 led, use same pcb design, pin to pin function and same control way. The LED contains an intelligent digital interface data latch signal circuit.Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel,and the default output constant current value OUTR/OUTG/OUTB is 12MA.
-
TM1934 60leds DC12V 20pixels/m RGB Pixel LED Strips
TM1934 is Dual-Signal. Signal break-point continuous transmission. If one pixel is damaged, the following LEDs still work .Static effect, Chasing effect, special effect etc .Comes with backup data.
Differences between WS2813, WS2815 and TM1934. TM1934: DC12V/24V One IC drives 3 LEDs. WS2813: DC5V One IC drives 1 LED. WS2815: DC12V One IC drives 1 LED. Similarities:4 pin .Dual-Signal. 5050SMD .RGB IC Chip.
-
HD8813 WS2813 Pixel LED Chip
HD8813 WS2813 and LC8813 LEDs are pin to pin function,same lighting effect,same control way. HD8813 is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit. DC5Vaddressable, and each LED is a pixel. The LED contains an intelligent digital interface data latch signal circuit. , Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel,and the default output constant current value OUTR/OUTG/OUTB is 12MA.
-
External GS8202 IC Componenets
This pixel protocol was designed by Genesis-Systech in China. The control circuit comes in a SOP8 package, allowing for more flexibility with LED choice.
When configuring your pixel device, select ‘GS8208′ as your Pixel Type. This is the equivalent protocol that will allow you to use GS8202 pixels
-
HD107 APA107 LC8822 digital LED Chip with clock wire
HD107 is same with APA107, the upgrade type of APA102 with 9khz fresh rate, some factory named LC8822, and some company use it to replace apa102 and sk9822, HD107 use big chip, more brighter, less Luminous Attenuation, better heat dissipation,which has one double signal line– the data cable and clock cable.After a series of improvement design,it can well compatible with other two signal IC,and share the same controller system. It is compatible with SK9822/APA102 and pin to pin function, using same pcb design and control way, one led 1pixel addressable.
-
HD107S NS107S LC8823 LED Chip with clock wire high fresh rate
HD107S is developed by HIDA, we are the original mabufacturer, some factory named LC8823, and some one use it to replace APA102, it is addressable 5050 rgb led chip,with our newest circuit technology ,the PWM frequency can be as high as 27kHz,so can be very high signal data transfer speed,and the default output constant current value OUTR/OUTG/OUTB is 17MA. This super speed is good for many big projects with huge pixels,and lot of data transfer. Greatly use as the lighting source of the digital led strips and led display and many other PCBA. DC5V one led 1 pixel , compatible with APA102/SK9822, pin to pin function, same control way, but faster FPWM
-
HD8812 SK6812 4020 Pixel LED SMD
This pixel led smd is side view type, HD8812 4020 is same protocol with sk6812 4020/lc8812 4020, within SK6812 IC inside,packaged with the R,G,B color chips inside the 4020 side rgb smd led,it is individual addressable rgb side firing led chip, and the default output constant Current Value, OUTR/ OUTG/OUTB is 12MA. It can achieve individual single pixel control,point by point scanning,reach magic RGB chasing, horse racing, gradual change and other color effects.
-
5050 RGBWW LED RGBCCT
(1) Ideal for 5050 RGBWW/RGBCCT LED lighting application to avoid multi-shadows.
(2) Higher heat conductivity for better thermal management.
(3) Provide variable and innovative array LED layout designs and combinations.
(4) Reduce the initial development cost and time.
(5) Lead free reflow solder compatible with RoHS compliant.
-
3528 RGB LED
(1) 6pin 3528 RGB LED provides the leading Chip on Top SMD type of LED technology.
(2) lighting solutions. It offers excellent uniformity, flexibility and cost efficiency along with compact size and wide range.
(3) of color selections. All components are produced by packing high-performance LED chips and silicon resin with proprietary phosphors.
-
SMD 5050 RGB LED
(1) 3-in-1 SMD 5050 RGB LED provides the leading Chip on Top SMD type of LED technology.
(2) Lighting solutions. It offers excellent uniformity, flexibility and cost efficiency along with compact size and wide range of color selections.
(3) All components are produced by packing high-performance LED chips and silicon resin with proprietary phosphors.
-
5050 RGBW LED
(1) Ideal for 5050 RGBW LED lighting application to avoid multi-shadows.
(2) Higher heat conductivity for better thermal management.
(3) Provide variable and innovative array LED layout designs and combinations.
(4) Reduce the initial development cost and time.
(5) Lead free reflow solder compatible with RoHS compliant.