Products
-
HD107S 3535 Micro pixel LED Chip
(1) HD107S Smart 3535 SMD integrates high-quality external control double-wire serial cascaded constant current IC, compatible with SK9822/APA102, BUT MUCH BETTER, same control way. some factory indicate it as APA102, or say it is upgrade of sk9822, or named LC8823/NS107S.
(2) Complete external control pixel, make the color mix uniformity and consistency.The default output constant current value OUTR/OUTG/OUTB is 17MA.
(3) Built-in power-on reset and power-down reset circuits, the light does not light up after power-on.
(4) Two-wire data transmission, unlimited cascading, the maximum serial input data frequency is 40MHz.
(5) No data input, zero power consumption when the light is off.
(6) The PWM refresh frequency is 27KHz.
-
HD8812 SK6812 WS2812B 5050 Pixel LED Chip Black and White
HD8812 5050 Pixel LED is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit. Its appearance is the same as a 5050 LED . Each LED is a pixel, it is same function with addressable pixel 5050 sk6812/ws2812b/lc8812/apa104/apa105/apa109 led, use same pcb design, pin to pin function and same control way. The LED contains an intelligent digital interface data latch signal circuit.Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel,and the default output constant current value OUTR/OUTG/OUTB is 12MA.
-
TM1934 60leds DC12V 20pixels/m RGB Pixel LED Strips
TM1934 is Dual-Signal. Signal break-point continuous transmission. If one pixel is damaged, the following LEDs still work .Static effect, Chasing effect, special effect etc .Comes with backup data.
Differences between WS2813, WS2815 and TM1934. TM1934: DC12V/24V One IC drives 3 LEDs. WS2813: DC5V One IC drives 1 LED. WS2815: DC12V One IC drives 1 LED. Similarities:4 pin .Dual-Signal. 5050SMD .RGB IC Chip.
-
HD8813 WS2813 Pixel LED Chip
HD8813 WS2813 and LC8813 LEDs are pin to pin function,same lighting effect,same control way. HD8813 is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit. DC5Vaddressable, and each LED is a pixel. The LED contains an intelligent digital interface data latch signal circuit. , Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel,and the default output constant current value OUTR/OUTG/OUTB is 12MA.
-
UCS1904 IC Componenets
This pixel protocol was designed by Lianxinke in China. UCS1904 is an improved design of its previous version, UCS1903, operating up to 24V instead of 12V and using improved optics to achieve a higher PWM rate. The control circuit comes in a SOP8 package, allowing for more flexibility with LED choice.
-
TLS3001 IC Componenets
This pixel protocol was designed by Teralane Semiconductor Inc. in China The control circuit can come in a SOP8/SOP10/SOP14 package, depending on which functions are being used, allowing for more flexibility with LED choice.
-
SM16716 IC Componenets
This pixel protocol was designed by Sunmoon Microelectronics in China. SM16716 is an improved design of its previous version, SM16712, using a clock line to achieve faster refresh rates and improved optics to achieve a higher PWM rate. The control circuit comes in a SOP16 package, allowing for more flexibility with LED choice.
-
SM16712 IC Componenets
This pixel protocol was designed by Sunmoon Microelectronics in China. SM16712 is equipped with all the same features as its previous version, SM16703, but supports 4 RGB pixels off the one chip. The control circuit comes in a SOP16 package, allowing for more flexibility with LED choice.
-
SM16704 IC Componenets
This pixel protocol was designed by Sunmoon Microelectronics in China. SM16704 is equipped with all the same features as its previous version, SM16703, but is dedicated to RGBW. The control circuit comes in a SOP8 package, allowing for more flexibility with LED choice.
-
SM16703 IC Componenets
This pixel protocol was designed by Sunmoon Microelectronics in China. The control circuit comes in a SOP8 package, allowing for more flexibility with LED choice.
-
SM16511 IC Componenets
This pixel protocol was designed by Sunmoon Microelectronics in China. It uses a non-differential DMX512 protocol to drive pixel chips. The PWM rate is 3300Hz by default but can be configured to run at 800Hz if desired. The control circuit can come in a SOP10/SOP16 package, depending on which functions are being used, allowing for more flexibility with LED choice.
-
GS8208 IC Componenets
This pixel protocol was designed by Genesis-Systech in China. While the features are very similar to GS8206, GS8208 also allows for a constant current pixel system, via a series LED connection. This results in a more stable lighting system. The control circuit comes in a SOP8 package, allowing for more flexibility with LED choice.