Pixel LED Chip
-
HD8812 SK6812 5050 Digital LED Chip with capacitor inside
HD8812 SK6812 5050 Digital LED Chip with capacitor inside it is same protocol with sk6812, just add one piece capacitor inside of LEDs, can work more stable, it is same function with addressable pixel 5050 sk6812/ws2812b/lc8812/apa104/apa105/apa109 led, use same pcb design, pin to pin function and same control way. The LED contains an intelligent digital interface data latch signal circuit.Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel,and the default output constant current value OUTR/OUTG/OUTB is 12MA.
-
HD8808 WS2815 5050 pixel rgb led chip 12V individual addressable
1, The control circuit and RGB chip are integrated in a 5050 components, to form an external control pixel.
2, 12V DC power supply, can effectively reduce the operating current of the pixel LED, and decrease the voltage-drop of the PCB, this is to advance the consistency of the mixed lights for long-distance transmission.
3, Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform ofsignal takes place.
4, The gray levels of each pixel are of 256 levels, which achieves “256*256*256=16777216” full-color display, and the refresh frequency reaches to 2KHz.
5, Serial cascade interface, data receiving and decoding depend on just one signal line.
6, Dual-signal wires version, signal break-point continuous transmission.
7, Any two point the distance more than 5M transmission signal without any increase circuit.
8, When the refresh rate is 30fps, cascade numbers is at least 1024 pixels.
9, Data transmitting at speeds of up to 800Kbps.
10, Good color consistency reliability, high cost-effective. -
HD107S 3535 Micro pixel LED Chip
(1) HD107S Smart 3535 SMD integrates high-quality external control double-wire serial cascaded constant current IC, compatible with SK9822/APA102, BUT MUCH BETTER, same control way. some factory indicate it as APA102, or say it is upgrade of sk9822, or named LC8823/NS107S.
(2) Complete external control pixel, make the color mix uniformity and consistency.The default output constant current value OUTR/OUTG/OUTB is 17MA.
(3) Built-in power-on reset and power-down reset circuits, the light does not light up after power-on.
(4) Two-wire data transmission, unlimited cascading, the maximum serial input data frequency is 40MHz.
(5) No data input, zero power consumption when the light is off.
(6) The PWM refresh frequency is 27KHz.
-
HD8812 SK6812 WS2812B 5050 Pixel LED Chip Black and White
HD8812 5050 Pixel LED is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit. Its appearance is the same as a 5050 LED . Each LED is a pixel, it is same function with addressable pixel 5050 sk6812/ws2812b/lc8812/apa104/apa105/apa109 led, use same pcb design, pin to pin function and same control way. The LED contains an intelligent digital interface data latch signal circuit.Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel,and the default output constant current value OUTR/OUTG/OUTB is 12MA.
-
HD8813 WS2813 Pixel LED Chip
HD8813 WS2813 and LC8813 LEDs are pin to pin function,same lighting effect,same control way. HD8813 is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit. DC5Vaddressable, and each LED is a pixel. The LED contains an intelligent digital interface data latch signal circuit. , Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel,and the default output constant current value OUTR/OUTG/OUTB is 12MA.
-
HD107 APA107 LC8822 digital LED Chip with clock wire
HD107 is same with APA107, the upgrade type of APA102 with 9khz fresh rate, some factory named LC8822, and some company use it to replace apa102 and sk9822, HD107 use big chip, more brighter, less Luminous Attenuation, better heat dissipation,which has one double signal line– the data cable and clock cable.After a series of improvement design,it can well compatible with other two signal IC,and share the same controller system. It is compatible with SK9822/APA102 and pin to pin function, using same pcb design and control way, one led 1pixel addressable.
-
HD107S NS107S LC8823 LED Chip with clock wire high fresh rate
HD107S is developed by HIDA, we are the original mabufacturer, some factory named LC8823, and some one use it to replace APA102, it is addressable 5050 rgb led chip,with our newest circuit technology ,the PWM frequency can be as high as 27kHz,so can be very high signal data transfer speed,and the default output constant current value OUTR/OUTG/OUTB is 17MA. This super speed is good for many big projects with huge pixels,and lot of data transfer. Greatly use as the lighting source of the digital led strips and led display and many other PCBA. DC5V one led 1 pixel , compatible with APA102/SK9822, pin to pin function, same control way, but faster FPWM
-
HD8812 SK6812 WS2812B 3210 Side view pixel LED Chip
(1) HD8812-3210 Side LED is a side emitting pixel RGB LED, it is 3 wires LED (5v, DAT, GND),which can be compatible with WS2812/SK6812,same function and same control way. each channel is 12mA, and HD8812-3210 led current is 36mA per led, side Control circuit and the RGB chip in SMD 3210 components.to form a complete control of pixel,color mixing uniformity and consistency.
(2) Red drive special treatment, color balance.
(3) Line data transmission.
(4) Plastic forward strengthening technology, the transmission distance between two points over 10M.
(5) Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec.
(6) same with ws2812n sk6812 1204 1206 pixel led chip
-
HD8812 SK6812 4020 Pixel LED SMD
This pixel led smd is side view type, HD8812 4020 is same protocol with sk6812 4020/lc8812 4020, within SK6812 IC inside,packaged with the R,G,B color chips inside the 4020 side rgb smd led,it is individual addressable rgb side firing led chip, and the default output constant Current Value, OUTR/ OUTG/OUTB is 12MA. It can achieve individual single pixel control,point by point scanning,reach magic RGB chasing, horse racing, gradual change and other color effects.