HIDA WS2813 Pixel 5050 RGBW LED Tapes 60leds 144leds

A digital LED tapes of which the color and brightness of each LED can be controlled separately. A lot of LEDs can be placed in sequence and all can be controlled with 1 pin of a microcontroller. Various platforms provide support for this LED by means of libraries, including Arduino and Raspberry Pi.

The strip can be cut between each LED. This makes the strip easy to be shortened or extended. The strip can be easily sticked on something by means of the double-sided tape at the bottom of the strip.

This LED strip also has a backup data line. If one LED fails, this backup line ensures that the remaining LEDs continue to work. Only if you have two defective LEDs in a row, the rest of the LEDs will stop working, but that chance is small.

Specifications:

• Supply voltage: 5V DC
• Signal voltage: 5V
• Maximum current:LED chip: WS2813B
  • Per LED: 60mA
  • Whole strip: 8.64A ±10%
• Color: RGBW
• Number of LEDs: 30/60/72/144leds
• Backup data line: Yes
• Strip width: 10/12mm
• Strip length: 5m/reel or customized
• PCB Color: White/Black

For more information about the LED chip, see the datasheet under the tab “Downloads”.